Contact Us
T: 01625 541892
M: 07827 470312

Advice

Safe Use of Diamond Blades

Before using your machine always check:
  • The machine is in good, safe condition & complies with all safety requirements
  • All guards are undamaged & in place
  • The flanges are of equal size & free from burrs

 

Always check that the blade::

  • Is free from cracks & damage
  • Is the correct blade for the application
  • Has the correct bore size
  • Has the correct peripheral speed for the machine it is to be used on
  • Is mounted correctly with the directional arrow pointing the right way

 

Always ensure that the work area:

  • Is clean & free from obstructions & the material to be cut is secure
  • Has barriers or warning signs in place

 

When cutting always:

  • Start & run the machine to check for smooth running
  • Place the blade into the material, the weight of the machine is adequate pressure
  • Cut with a slow sawing or reciprocating motion, do not turn or twist the blade in the cut
  • Use several passes to cut to the required depth, do not drop the blade to its full depth in one go
  • Periodically remove the blade from the cut & continue to rotate & “air cool” for several seconds if dry cutting
  • If wet cutting, ensure optimum water supply,
Too much could result in the blade polishing
Too little could result in a paste forming and cause the blade to stick

 

  • How to Order

    For details on how to order any of our products, simply click the button below.

    How to Order

  • Sponsor

Diamond Blades | Pulvex sign up form


Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur excepteur sint occaecat cupidatat non

Diamond Blades | Pulvexlogin form